Your mobile power solution and / or emergency
UPS Battery + = Enerwatt Solution ultra-convenient and silent energy
The sine wave power inverter modified ew-3000 Enerwatt converts direct current (of a 12 V battery) AC 110V household current or current. It allows you to run most of your electrical appliances anywhere where traditional source of electrical power is unavailable or during a power failure. & Nbsp;
Et ! more
- & nbsp; SINE WAVE MODIFIED
- & nbsp; 2 INPUTS USB TO LOAD YOUR MOBILE PHONES AND TABLETS
- & nbsp; 2 120V TAKEN TO 15 AMP
- & nbsp; SCREEN LCD DISPLAY
- & nbsp; PROTECTION SYSTEM
- & nbsp; ROBUST DESIGN
Simply plug your favorite & nbsp appliances;
The modified sine wave inverter EW- 3000 Enerwatt has TWO EXITS CA North American-type standards, 15A (1650W) each, and TWO PORTS USB (2.1 A shared) that allow you to power one or two tablets of 2.1 compatible A couple of USB devices 1A, such as cell phones.
Robust, quiet, safe & nbsp;
The lightweight aluminum housing is resistant to corrosion and reduces operating noise. In addition, it is equipped with a high-speed cooling system that turns on automatically when the internal temperature exceeds the set limit (60ºC). The EW-3000 UPS also has several built-in security features, such as protection against overload and short circuits, as well as thermal protection at 60ºC +/- 10ºC.
Ultra-convenient & nbsp;
The MENU button on the modified sine wave inverter EW-3000 Enerwatt toggles the display between the OUTPUT and INPUT VOLTAGE. In addition, its digital LCD screen shows you the status of the unit at all times:
- & nbsp; Shows the battery charge level;
- & nbsp; Displays the output power (W) or the input voltage (Vcc)
- & nbsp; warning indicator (high voltage, low voltage and overvoltage)
The inverter Enerwatt EW-3000, whose performance has been verified by TEM, complies with safety standards of Underwriters Laboratories and Canadian Standards Association.
Hardwire & nbsp;
This model can also be connected via a single fixed connection, allowing you to distribute the power of your UPS.
Additional Product & nbsp;
EWRC2 remote control can be used with Enerwatt following inverters: EW-1100 • EW-2000 • EW-3000 • EW-4000. It has a bright LED indicator that displays the status of the UPS, an on / off switch (on / off) and a twenty-foot cable that easily connects to the UPS.
- PEAK POWER: 6000 W
- WATTS: 3000 W
- VOLT input: 12 V
- VOLT output: 115 V
- TEMP. Surface: 65 ° C Max
- TEMP. Operating: 0 to 40 ° C
- HEIGHT: 124 mm / 4.88 "
- WIDTH: 144 mm / 5.67"
- LENGTH: 335 mm / 13.19 "
- WARRANTY: 24 months